We perform welding and metal glue repairs of cracked engine block on luxury cars and semi-trucks saving you expense of engine or even vehicle replacement. Cracked engine block and engine block repairs determine the ownership’s future for luxury cars and semi-trucks. This is a cut off deal for many luxury cars or semi- trucks. Nobody wants to replace the engine in the luxury cars and semi-trucks due to its costs. Owners can not sell a vehicle with damaged engine block. Then the only choice left is to repair the engine block. There are practically two choices cracked block engine repair: welding and metal glue.
The accident cars and semi-trucks usually develop cracked engine block. Most damages of engine block due to vehicle participation in accident are on engine block’s surface in areas of variety of auxiliary parts attachments. The extreme forces during the accident rip the attachments from the engine block cast. These forces pull out bolts or break them tearing the threaded holes. And they damage the attachments’ seats. Without the attached components, the engine of your luxury car or semi-truck will not run.
BMW aluminum engine block repair by GTAW welding, Made by JW Portable Welding & Repair, London, Ontario, 2017
Replacement of damaged engine on 5-year-old luxury car that participated in an accident could be in the range of 12 – 17 thousand dollars. But, does it make sense to replace the engine on old car? If you are willing to put the used engine to your old car, you can end up very soon at the same spot where you are now.
The situation with semi-trucks is even riskier. The replacement of engines for a semi-truck that participated in an accident is an expense that stop the hart beat for a while. The cost of the used engine itself without any labour cost could range form $55, 000 to $80,000. Although, these used engines are well tested prior delivery and have a warranty of a half year to a year, they still are risky. Consequently, the question remains, do you want to go through another replacement of the engine after you have already replaced one? Any car owner of semi-truck owner understands, these are very difficult decisions affecting you private or your business pocketbook.
Fortunately, our repairs of external damages on engine block are reasonably priced since it is a substantial repair and involves advanced welding technology. We repair most of these relatively simple damages by welding. Most often, we use our portable welding machines due to their extremely short reaction time. In order to start welding, we must plug our portable welding machines to the mechanical shop’s receptacle for their better performance. Then, we can quickly plug the damaged holes and weld repair the damaged seats.
Unfortunately, your mechanic must remove all obstacles that could prohibit our access to the damaged spot. We recommend removing everything up to 1.5 feet radius from the damaged spot and remove everything in front of the damage spot up to 4 feet. There shouldn’t be any obstacles for horizontal and angular vision to the damaged spot.
We use Tig or Stick welding techniques with very sophisticated alloys to weld repair damages on steel or on aluminum engine block. Moreover, we classify welds on cast steel and cast aluminum as difficult welds. Many of these engine blocks have multilayered wall structure that additionally complicate the welding process. That is why it takes us a while to plug the damaged holes and weld repair of the damaged seats. The most difficult however, are multi-layer welding rebuilds performed on very thin cast extensions that are used to hold the attachments. Repairs of these extensions cost the most.
The accident car or semi-truck owner must be aware that these welding repairs are:
The technological difficulty is based on matching our alloy filler to the alloy of the cast. These welding repairs are time consuming since the welding procedure takes to the account cooling periods between welding passes. These cooling periods are necessary to avoid metal cracks. Furthermore, we can not use warm method of cast welding for cracked engine blocks since it involves putting the element to stove. Simply put, we can not use warm method of cast welding due to all electrical and mechanical components surrounding the engine block. Therefore, we must keep the welding temperatures in check for a cold method of cast welding.
Cracked engine block repair close to the oil pan. Large area covered by industrial epoxy glue. Made by JW Portable Welding & Repair, London Ontario, 2018
The risk of the welding on thin cast parts of engine block is significant due to the thermal expansion revealing hidden cracks. Very often these hidden cracks are not visible even using the chemical methods for developing them. The cold temperature of the engine block closes them shut. It happens very often that applied heat during the welding reveals additional cracks in the surrounding area. Then, we must weld repair these cracks too. In reality, the success of weld repair is confirmed by your mechanic who is able to attach back the ripped during accident component.
The metal glue repairs of cracked engine block on luxury cars and semi-trucks are very popular. They can be done:
We recommend metal glue repairs of cracked engine block when the crack is going completely through the cast. As a result of such crack, the engine leaks oil when warmed up. To our disposition, we have 24 different metal glues with additional 16 different additives to make a custom metal glue for your application. When custom preparing this glue, we consider:
Getting to repair the cracked engine block. JW Portable Welding & Repair, Mississauga, Ontario, 2018
The metal glue repair of cracks in engine block is not suitable for fast moving cracks, that is moving at speed of ¾ inch or more per year. If the crack moves outside of metal glue patch than your engine will start leak oil again through the open portion of the crack. The metal glue patch does not stop the development of the crack, but it simply seals it. We extend the edges of metal glue patch passing about 2 inches the edges of the crack therefore we will extend the utilization of the engine by 8 years if the crack moves ¼ inch every year.
Repair of cracked engine block on semi truck using industrial epoxy glue. Made by JW Portable Welding & Repair. London, Ontario, 2016
We also use metal glue as a supporting method during the welding process in places where we can not reach.