Wrought Iron Fence, decorative, custom
Written by admin, 22 February 2022
We fabricate custom and decorative wrought iron fence that not only increases the security but also distinguishes your property. Our fencing provide additional cub appeal to your property with attractive custom designs that make statement about property’s owner values, believes and interests. Through our fencing you make a statement in your neighborhood. Our fencing designs follow the same steps as wrought iron gate designs.
Call us, text us or email us for traditional and advanced welding services. And leave us your feedback on our google profile.
The interview proceeds the design of your wrought iron fence
On the first meeting with the client we discuss objectives of decorative wrought iron fence and how we suppose to meet them. We openly discuss security aspects as well as communication aspects of decorative fencing. These discussions are extremely important as they will influence our future designs as well as material used. Although, we steel talking about wrought iron the thicknesses of material can increase and the height of fence sections will increase too if security of your fencing will take priority. Moreover, our decorations placed on top of fence’s panels will have sharp edges in order to climbing through the fence as unpleasant as possible.
In general, cutting the wrought iron fence with a cutting disk mounted on a grinder is much more difficult than cutting a wire fence. Thieves usually find cutting wire fence easy since wire fencing almost guides the cutting disk on the straight line. However, cutting wrought iron rods in diameter of 1/2 inch or more becomes more difficult since it damages the cutting disk when handled improperly. Also, the time to cut a wrought iron rod is much longer than time to cat a wire fence. Additionally, the close location of prongs will make a necessary to cut 2 prongs at the same time which increases drastically the risk of breaking the cutting disk and even injury.
Your suggestions and examples influence our designs
Your suggestions, pictures of desired fence, favored motives or even pictures of most important events in your life will guide us in our designs. In our efforts we would strive to minimize the the volume of details involved in order to reduce the cost, but we will definitely provide the solutions that you will be proud of. Please keep in mind that due to the length of fencing some designs have to be simplified to make an overall impressive curb appeal.
“Jack Miner” wrought iron fence
The Jack Miner’s wrought iron fence is a simple example of our decorative customization of the fence according to pictures presented by the client. The Jack Miner sanctuary located in Kingsville, Ontario, Canada, Ontario’s most southern town, it is home to countless migrating geese and ducks. In the spring and the fall, the grounds will be filled with birds passing through using the sanctuary as a safe resting place for food, water, and shelter. Our design of the fence have focused on Jack Miner efforts.

Most of our designs are hand crafted in our shop. Skilled tradesmen use plasma cutters manually to create wonderful and unique pieces based on your pictures. We relay rather sporadically on automatic plasma cutters in cases of multiple same designs. Therefore the automatic process is only used in large and long fencing.
Iron fence with maple leaves in black
The iron fence with maple leaves in black balances beauty with security. This medium size wrought iron fence has a strong structure with 5/8″ thick prongs positioned very closely. On top of this strong structure, we have placed large size maple leaves made from 3/16″ sheet metal. The leaves positions does not allow to place a hand on top of the bar. These maple leaves have very sharp edges that make climbing over the fence rather unpleasant.

Decorative and finesse wrought iron fence
This decorative and finesse fence serves as an example that not all wrought iron fences must have prongs. These fences without the prongs include beautiful geometric forms that make desired impression. While choosing this type of design, you can consider a meaningful shape and the rest leave it to us. We will bend the wrought iron rod to the desired shape and then make a fence panel from these shapes.
Please also keep in mind that these type of design relay on rather thinner wrought iron rod due to bending and then assembly requirement. Therefore these fences should be installed where the security risks are lower and the elegant design becomes more important.



As you can see in above images these type of fence is labor intensive and therefore rather expensive. Therefore, we advice to use this type of design only in rather short fencing. Please note that we can also use stainless steel rods in these finesse designs which will increase significantly the overall effect.
Traditional and conservative designs
We also fabricate more traditional designs from the wrought iron rods. These designs have rather more decorative objective signalizing the edge of the property. Their security value is rather minimal.


Please contact us for more information. The supplied material was coming from Steel Centre
Leave a Reply
You must be logged in to post a comment.